Fall Protection Systems - Fall Arrest Solutions - Fall Restraint Systems

Hierarchy of Fall Protection

Hierarchy of Fall Protection The Hierarchy of Fall Protection is the preferred order of control to eliminate..

By admin 18 March 2019

Hierarchy of Fall Protection

The Hierarchy of Fall Protection is the preferred order of control to eliminate or reduce the risk of fall from height. This methodology mirrors common safety practices for hazard abatement beginning with elimination and ending with administrative controls.

Hierarchy of fall protection
A ranked or graded series of fall protection solutions ranging from the best solution to the worst. In order of best to worst, these solutions are: Hazard Elimination, Passive Fall Protection, Fall Restraint, Fall Arrest, and Administrative Controls.

1. Hazard Elimination

The preferred solution to all fall hazards is elimination. The reason for exposure to the fall hazard is challenged and evaluated to determine if a change in the procedure, practice, location or equipment will eliminate exposure to the fall hazard. Specifying HVAC (Heating, Venting and Air Conditioning) equipment be located on the ground, or in an equipment room rather than by the edge of the roof, is an example of hazard elimination.B

2. Passive Fall Protection

Physical barriers like guardrails around unprotected edges and covers over holes are examples of passive fall protection.

Passive protection is generally considered to provide a higher level of safety since the opportunity for error is less than using personal protective equipment (PPE). The initial costs of passive protection, while possibly high, are often more efficient than the long-term costs of PPE. However, passive protection may not be warranted if the frequency and duration of exposure to the fall hazard is limited.

An exhaustive hazard assessment provides the information needed to make these kinds of decisions to maximize cost-effectiveness.

3. Fall Restraint Systems

Fall restraint systems are erected in such a manner that a fall cannot occur. Fall restraint systems use PPE to restrict the worker’s range of movement so they cannot physically travel to the fall hazard.

Fall restraint systems are often underutilized because they are not specifically mentioned in many regulations, but they are preferred over fall arrest systems. Free fall distance is not an issue for fall restraint systems, therefore arresting forces, clearance requirements, secondary injuries, and rescue issues are virtually eliminated.B

4. Fall Arrest Systems

Fall arrest systems are erected in such a manner that a fall can occur but the fall is arrested within acceptable force and clearance margins.

Fall arrest systems have a higher risk associated with them, since we have to stop the falling worker within an acceptable level of force and prevent him/her from contacting the surrounding structure or the ground.

Training for both fall restraint and fall arrest systems is key.

5. Administrative Controls

Administrative controls are work practices or procedures that increase a worker’s awareness of a fall hazard. It must be noted that administrative controls are the least preferred method of protection because they do not provide a physical or positive means of protection.

Administrative controls are preventive measures taken to reduce the likelihood of a fall. These methods include safety monitors, warning lines, warning horns, designated areas, or control lines. It must also be noted that OH & S regulates the use of many administrative controls and it is incumbent on the fall protection program administrator to understand the jurisdictions and regulations that apply.

We’re here to help You Ensure Roof Safety

If you allow workers Roof Access to your building, you have a legal obligation to comply with all Australian Standards, Codes and Regulations around Height Safety, Roof Safety, Fall Protection and Fall Arrest. To ensure the Height Safety of your workers and the legal compliance for your business, contact the trained and accredited experts today for an obligation free consultation.


Related Articles

Jayco Caravans Case Study – Height Safety

Client: Jayco CaravansLocation: Dandenong South, Melbourne, VictoriaHeight Safety System Installed: Overhead Rail System About Jayco Caravans Jayco..


Lend Lease Engineering Case Study – Static Line System

Client: Lend Lease EngineeringLocation: Tullamarine, Melbourne, VictoriaHeight Safety System Installed: Static Line Systems About Lend Lease Engineering..


Sugar Australia Case Study – Height Safety Systems Project

Client: Sugar AustraliaLocation: Yarraville, Melbourne, VictoriaHeight Safety System Installed: Fixed Ladders, Guard Rails, Roof Platforms, Roof Walkways..